Filter: It is a professional term for filtration and purification functions. It is a simple equipment for purifying the resources of the original fluid and the separation of resources. Now the filter element is mainly used in oil filtration, air filtration, water filtration and other filtration industries. The filter device separates the solid particles in the liquid or gas, or makes the different material components fully contact, and accelerates the reaction time, which can protect the normal operation of the equipment or purify the air. blocking, thereby speeding up the reaction time. The liquid filter cleans the contaminated liquid (including oil, water, etc.) to the state required for production and life, that is, the liquid reaches a certain degree of cleanliness.

Common filter types:

1. Air filter.

Atmospheric filters are also called air filters. air filter. type, etc. It is mainly used in air filtration of construction locomotives, automobiles, agricultural locomotives, laboratories, sterile operation rooms and various precision operation rooms.

2.PP filter.

Melt-blown filter is also called PP melt-blown filter. Melt-blown PP sintered filter element is made of polypropylene ultrafine fibers by thermal fusion entanglement. The fibers randomly form a three-dimensional microporous structure in space. Gradient distribution, integrating surface, deep and fine filtration, can retain impurities of different particle sizes. The filtration precision is between 0.5-100 microns, and its flux is more than 1.5 times that of the same-precision peak room filter. Different types of end cap joints can be configured to meet the needs of various engineering installations.

3. Wire wound filter.

The textile fiber yarn with good filtering performance is precisely wound on the porous skeleton and refined. Its yarn materials are polypropylene fiber. Oil-free cotton. Oil-free cotton and so on. In the combined type, by controlling the winding loose and thinning density of the yarn, different precision cores can be produced, which can effectively remove the suspended solids and particulate impurities of various liquids, and have a high purification for various liquids. Effect.

4. Pleated microporous filter.

Using polypropylene (Polypropylene) thermal spray plastic fiber membrane, nylon (Nylonb) polytetrafluoroethylene microporous filter membrane, etc. as the filter medium, the precision filter device is made, which is small in size, large in filter area and high in precision. In the filter accuracy range between 0.1 micron to 60 microns. The connection of the filter end cap to the overall structure adopts heat fusion bonding. There are three international types of filter connectors: 222 connection. 226 connection. Flat mouth. We have carried out strict and comprehensive inspection on the products to ensure the stability of product performance.

5. Activated carbon filter.

There are two types of activated carbon filters: compressed activated carbon filters, and bulk activated carbon filters.

The pressed activated carbon filter element is made of coal-based activated carbon and coconut shell activated carbon with high adsorption value as filter materials, and then sintered and compressed with food-grade binder. The inside and outside of the filter element are covered with a layer of non-woven fabric with filtering effect, which ensures that the carbon core itself will not fall off. The two ends of the carbon core are equipped with soft rubber sealing pads, so that the carbon core has good sealing performance when it is loaded into the filter cartridge.

Bulk activated carbon filter packs the required activated carbon particles into a special plastic shell, and welds the end caps on both ends of the shell with a welding device. Filters are placed on both ends of the shell to ensure that the carbon core is in use. Will not drop charcoal powder and black water. The shell end cover can be made into different types of connectors according to customer requirements. Interface types are: flat type. Tube type (model: 4042.4044.4046, etc.)

6. Double section filter.

The previous section: The polypropylene meltblown filter precision is 5 microns.

Next section: Activated carbon particles of filter element built-in 170g activated carbon Material: ABS.PP.

Length: 250mm Outer diameter: 70mm Flow: 8L/S Total flow: 6-8T.

Activated carbon index: strength>90; iodine value (mg/g)>950; methylene blue (mg/g)>120.

7. Ceramic filter.

Since the porcelain filter is made of pure natural physical materials, it will not cause secondary pollution when using the water purifier. At the same time, it does not remove all kinds of minerals like a water purifier, and retains the beneficial minerals in the water. It can effectively remove sediment, bacteria, rust, never block, long service life, excellent filtering effect, and no blockage, and can adapt to the environment with poor water quality. At present, the ceramic filter element with higher filtration precision in the world is the double-controlled membrane ceramic filter element with an average pore size of 0.1 microns. The water filtered by TA does not need to be boiled before drinking, which fully meets the national direct drinking water standard.

8. Resin filter.

The resin is a porous, insoluble exchange material. The glue machine resin filter element is loaded with millions of microplastic pellets (balls), all of which contain a large number of negative charge exchange sites for positive ions. When the resin is nascent, this charge exchange site is occupied by sodium ions. After passing through the resin storage tank, the calcium and magnesium come into contact with the resin beads to displace the sodium ions from the exchange site. This resin prefers to bind strongly charged cations, and calcium and magnesium ions have a stronger charge than sodium ions. Instead of sodium ions, drain the water softener through the resin "bed", allowing the water softener to drain "soft" water. Eventually, all the resin exchange sites are occupied by calcium and magnesium and cannot continue to work.

9. Titanium rod filter.

The titanium rod filter element has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy guarantee of filtration accuracy, and easy regeneration; it is made of titanium powder by sintering at high temperature after molding, so the surface particles are not easy to fall off; the operating temperature in the air can reach 500~600℃; used to filter a variety of corrosive media, such as hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia, iron, copper, sodium and other chloride solutions. Excellent mechanical properties, can be cut, welded and other mechanical processing, high compressive strength, internal pressure failure strength as high as 2MPa or more; its filtration accuracy is easy to ensure, even if it works under high temperature and high pressure, the aperture will not be deformed. Its porosity reaches 35~45%, the pore size distribution is uniform, the dirt holding capacity is strong, and it is convenient to reuse after regeneration.