Structure: filter screen, flange is composed of two parts, there are single layer and multi-layer.

Production materials: stainless steel wire mesh, stainless steel mat mesh, punched mesh, expanded metal mesh

Production process of stainless steel filter cartridge: It is made by lap welding of stainless steel plate welding seam or seamless stamping.

Features of stainless steel filter cartridge: It has the characteristics of bright product surface, corrosion resistance, simple process, uniform filtering particles and large passing flow.

The working principle is: remove a small amount of impurities in the filter medium, which can protect the normal operation of the equipment or the cleanliness of the air. When the fluid passes through the filter cartridge with a certain precision in the filter, the impurities are blocked, and the clean fluid flows out through the filter cartridge. . So as to achieve the clean state we need for production and life.

Stainless Steel Filter Cartridge Application:

1. Single and multi-layer spot welding filter cartridges, filters and filters have good filterability for 1-500μm particles and liquids, and the flow per unit area is large, and can be used repeatedly after cleaning.

2. It is a detachable cylindrical device, the top and bottom of the cylinder are closed, and a filter medium is installed around it. It belongs to deep filtering.

3. The solid particles of the suspension are smaller than the pore diameter of the filter medium. Particle filtration is trapped and adhered to the wall of the pore by the collision and extrusion of the slender and curved channels in the filter medium and the fluid. It is suitable for occasions where the particles in the suspension are very small and the content is very small. Generally, the solid content is not higher than 0.01%. It can remove solid particles of 0.02~~100μm.

4. Acid and alkali resistance, high temperature resistance, wear resistance, not easy to damage, can be used repeatedly after filtering and cleaning.

Use of stainless steel sintered filter element

It is used for screening and filtration in acid and alkali environment, as mud mesh in petroleum industry, as screen filter in chemical fiber industry, and as pickling mesh in electroplating industry.

Filter mesh type: there are single layer and multi-layer; according to the shape, it is divided into circular, rectangular, waist-shaped, oval and so on. The multi-layer mesh has two layers and three layers.

Filter Diameter: 5mm to 600mm.

This product mainly uses stainless steel filter mesh according to the process: 1. Multi-layer spot welding filter mesh. 2. Multi-layer edging filter mesh.

The stainless steel filter mesh is divided by shape: rectangle, circle, ring, distance shape, waist shape, special shape.

According to the structure, the stainless steel filter mesh is divided into: single-layer mesh, multi-layer composite filter mesh, and combined filter mesh.

The stainless steel filter mesh is divided into layers: single layer, double layer, three layers, four layers, five layers and multiple layers.

Main material of stainless steel filter mesh: stainless steel filter mesh. (20 to 800 meshes).

Applicable industries of stainless steel filter mesh: widely used in "chemical fiber spinning, short fiber, microfiber, leather, non-woven fabric, plastic granulation (pvc cable material. Sheath material), sheet extrusion