News

Company News

What are the differences between the regular tip and the filter tip of the pipette?
发布时间:2026-11-12 13:50:02

The regular model and filter model of pipette tips, many people may think they look similar at first glance. Both are used to suck liquids when attached to the pipette. However, the actual usage makes a big difference. Choosing the right one makes the experiment go smoothly; choosing the wrong one may result in inaccurate results or even the complete failure of the entire batch of samples.

The regular model of the tip has a simple structure, with a continuous channel inside, and there is no barrier from the liquid suction port to the pipette. For routine operations such as preparing solutions, dilution, adding samples, and changing liquids, it is sufficient to use it. Its advantage is that it is cost-effective and doesn't cause concern even if it is consumed in large quantities, making it suitable for daily experiments with low requirements for anti-contamination.

The filter model has an additional filter at the upper end of the tip. It is usually made of polypropylene. This filter's function is to block aerosols and splashed droplets during liquid suction, preventing them from entering the pipette interior. This way, it not only prevents cross-contamination between samples but also protects the pipette interior from liquid corrosion or contamination.

For experiments that are particularly sensitive to contamination, such as PCR, qPCR, molecular cloning, RNA experiments, cell culture, and virus detection, the filter model is almost always a must. Because in these experiments, aerosol contamination is very common, even a tiny residue can cause false positives and render the entire batch of results invalid. When handling corrosive, volatile, or biohazardous liquids, the filter can also reduce the entry of harmful substances into the pipette, protecting the equipment.

The filter model is usually sterilized before leaving the factory, free of DNase, RNase, and pyrogens. It can be used directly after opening the box, eliminating the need for additional sterilization. If an aseptic experiment is needed with the regular model, it is generally necessary to purchase a sterilized version separately or perform sterilization by oneself.

Of course, the filter model is more expensive. If the cleanliness requirements of the experiment are not high, the regular model is sufficient and there is no need to spend this extra money. Conversely, in scenarios involving molecular experiments, cell experiments, and pathogen detection, saving this money may lead to problems in the experiment and be a loss.


>